Guiju Intelligent EPP Machine

Introduction to EPP products:

EPP: Foamed polypropylene, with light specific gravity, good elasticity, shock resistance and compression resistance, high deformation recovery rate, good absorption performance, oil resistance, acid resistance, alkali resistance, resistance to various chemical solvents, non water absorption, insulation, heat resistance (-40~130 ℃), non-toxic and tasteless, can be 100% recycled with almost no performance degradation, is a truly environment-friendly foam. EPP beads can be molded into various shapes of EPP products in the mold of the molding machine.

Application scope:

EPP is widely used in automobiles, such as bumper core materials, crash blocks, roof lining components, door fillers, headrests, sun visors, etc., which can save fuel consumption and improve passenger safety. EPP has been widely used in the packaging industry, such as electronic products, medical devices, etc. Especially in the packaging of export products, it has become an irreplaceable packaging material in accordance with environmental protection requirements. Due to its non-toxic and high temperature resistance, it is also widely used in food packaging and microwave heating.

Guiju EPP molding machine equipment:

1. The overall steel plate material of the equipment rack is welded into high manganese steel zGMn12.

2. The overall rack surface of the equipment is shot blasted for rust removal, and the surface is treated with zinc and plastic spraying to package the anti-corrosion performance of the equipment.

3. The rack template assembly is supported by four main guide rods, which can be disassembled and replaced separately without the need to disassemble the equipment.

4. A balanced guide system is added to the moving die to carry the weight of the moving die and ensure the parallelism of the moving die operation, so as to ensure that the die gap distance between the fixed die and the moving die is equal, so that the thickness and size of the products produced from the same the first mock examination are consistent.

5. The equipment adopts a dual independent feeding system, which can work independently. Realize zero mold seam feeding.

6. A comprehensive safety perimeter to ensure that personnel do not come into contact with the working area of the equipment.

Equipment advantages:

1. The sturdy frame adopts a welded combination of full high manganese steel plates

2. Multi point steam inlet heating in the mold cavity to achieve the most uniform distribution of steam in the chamber

3. Symmetrical six point locking structure ensures sufficient locking force

4. The dynamic mold chamber is equipped with a balance guide rod to lock the switch position of the mold, ensuring the accuracy of the mold seam

5. Independent vacuum cooling system with high-efficiency condenser

6. The equipment control adopts full digital proportional control to accurately control the production energy consumption value

7. Using large-diameter valves can provide sufficient supply in an instant and shorten the molding cycle time

8. The main pole can be independently disassembled

9. Special insulation materials are used in the steam chamber to achieve mold cavity insulation and thermal insulation